
Size a pop-up table banner in pixels, check DPI against the printed width, add a QR code, and export a bleed-ready print PDF.
You have a weekend pop-up stall, a six-foot table and a print shop that wants a file by Thursday. The risk with a banner that big is not the design, it is the resolution: a picture that looks sharp on your laptop can turn soft when stretched across 72 inches. The Banner Sign Maker lays out a text-and-colour banner at an exact pixel size, tells you the DPI at your printed width, and can export a PDF with bleed.
The short answer: for a 72 by 30 inch table banner, enter 7200 by 3000 pixels, set the finished width to 72, and read the DPI line. That combination gives 100 DPI, which the tool flags as soft for close viewing. Narrowing the finished width to 48 inches at the same pixels gives 150 DPI.
Decide the printed size first. A table front of 72 inches wide and 30 inches tall has a ratio of 2.4 to 1, so the pixel dimensions must keep that ratio: 3600 by 1500, 4800 by 2000 or 7200 by 3000. The tool does the DPI sum for you: pixel width divided by printed width in inches.
3600 by 1500 at 72 inches is 50 DPI. 4800 by 2000 is about 67 DPI. 7200 by 3000 is 100 DPI. The page turns the line amber below 150 DPI and says the picture will look soft in print. Between 150 and 300 it calls the result fine for large signs viewed from a distance, and at 300 and above it calls it print quality. A big banner read from two metres away tolerates less resolution than a business card, but ask your printer what minimum they accept, because they know their machine.
Bigger pixel sizes use more memory in the browser. 7200 by 3000 is 21.6 million pixels, which is fine on a laptop but may struggle on an older phone. If export fails, the tool suggests trying a smaller size or removing the background photo.
There are twelve presets: Web Banner (1200 by 300), Social Post (1080 square), Storefront Sign (1200 by 800), Large Poster (1000 by 1400), Instagram Story (1080 by 1920), YouTube Thumbnail (1280 by 720), YouTube Channel Banner (2560 by 1440), Facebook Cover (851 by 315), X Post (1200 by 675), LinkedIn Post (1200 by 627), Yard Sign 24 by 18 inches (3600 by 2700, which is exactly 150 DPI at that size) and Flyer A4 (1240 by 1754). For a table banner use the width and height boxes directly.
The layout is fixed and centred: an optional logo at the top, a heading, a subheading, then optional bullet points and a footer line. Text is white, set over a two-colour gradient or over your own photo with the gradient laid on top at reduced opacity. Heading size is 9 percent of the shorter side, the subheading is 40 percent of that and the footer is 28 percent.
Write one offer line and nothing else. For a candle stall: heading "Spring Pop-Up", subheading "Hand-poured candles from 12 dollars", footer "Sat and Sun 10-5, Unit 4". That is it. Anyone walking past reads the heading, then the offer.
Lines are centred on a single row and never wrap. At 7200 by 3000 the heading is 270 pixels tall. Bold capitals in that font average about 0.65 of their height in width, so roughly 40 characters is the most a heading can hold before it runs off the edges. The subheading, at 108 pixels, has room for around 100 characters, but fewer reads better. Check the preview, and shorten the words rather than hoping.
With the bleed box ticked, the PDF page is the trim size plus 0.125 inch on every side, so a 72 by 30 inch banner becomes a 72.25 by 30.25 inch page with trim and bleed boxes set. The bleed is made by repeating the outermost pixels of the design outward, which carries gradients and photos to the cut line. It does not add artwork you cannot see, so keep text and logos well inside the edge. A half-inch or more of margin from the trim is a sensible habit on a banner this large.
The tool has no QR feature of its own, but a logo or image slot accepts any picture. Make a code in the QR Generator, download it, and upload it as the logo. It sits at the top centre at 1.8 times the heading height, which at 270 pixels is about 486 pixels, or nearly 5 inches square at 100 DPI. Scan it from a screen at arm's length before printing, and check that the dark code sits on a light backing, since the logo slot has no white box of its own.
Entering pixels without the ratio of the finished banner, so the print shop crops or stretches it.
Judging sharpness only on screen. Read the DPI line instead.
Putting the phone number in tiny footer text. At 28 percent of heading size it is readable up close, but not from the aisle.
Letting a busy photo run under the text. The gradient overlay softens it, but pick a calm photo.
Skipping a proof. Print a letter-size version and look at it from three metres away.
The photo and logo are processed in your browser, and nothing is uploaded. If the same offer also needs a handout, the Brochure and Flyer Maker covers that, and the marketing design category has more layouts. Downloads count toward your 2 trial usages a day.
Are you printing a table banner, a window sign or a yard sign next? Tell us on the contact page.