← All postsFreelancer watching a progress bar while a screen recording shrinks on a laptop

Get a 44 MB Screen Recording Under a 25 MB Upload Cap

Pick the right Compress Video setting, set an exact size target and know when to drop to 720p, with a 4-minute demo as the worked case.

compress videovideo file sizeupload limitscreen recordingclient portalvideo toolsbrowser tools720p
5 min readVideo Tools

The portal says "maximum file size 25 MB" and your four-minute product walkthrough is 44 MB. Re-recording is out, so the file has to shrink without turning into a blur. Compress Video re-encodes the clip in your browser until it fits a size you choose.

The video below walks through the tool once, so you can see the buttons before reading about them.

Compress a video in the browser

Compress a video in the browser

Do the arithmetic before you touch a slider

A size cap is really a bitrate budget. 25 MB is 26,214,400 bytes, and four minutes is 240 seconds, so the whole file (picture and sound together) can average about 874 kilobits per second. A screen recording of slides and a cursor usually looks fine at that rate. A fast-moving camera clip does not.

Now try the other number people hit. A chat app that caps uploads at 8 MB gives the same four minutes only about 280 kilobits per second. That is thin even for a screen capture, and it is why the tool has a separate 720p checkbox for exactly this squeeze. Knowing the budget tells you whether to expect a clean result or a compromise.

Also check the size ceiling of the tool itself. A trial session accepts files up to 50 MB, and a paid plan raises that to 200 MB. Above that the Compress button stays disabled and the page tells you the file is too large. A 480 MB raw capture needs trimming or splitting first, ideally with Trim Video.

The five ways to choose a size

After you drop a file in, a row of buttons appears. Light, Medium and Strong aim for a file at least 10, 25 or 50 percent smaller than the original. They are not vague quality labels: the tool calculates a target from your file size and encodes toward it. For the 44 MB demo that means roughly 39.6 MB, 33 MB and 22 MB.

Custom Target lets you type the number instead, with presets for 8 MB (the Discord figure), 25, 50 and 100 MB. This is the one to use when a portal quotes a hard cap. Manual Quality gives a slider from 0 to 100 percent compression with no size promise, which suits "make it a bit lighter" jobs where nothing is enforcing a limit.

For our case, choose Custom Target and enter 25. Strong would also fit, but it lands at 22 MB and spends picture quality you did not need to give up.

Steps for the 44 MB demo

  1. Drop the file on the page. If it is a damaged or cut-off MP4, the tool says so right away instead of failing after a long encode.
  2. Pick Custom Target and type 25 in the size box.
  3. Leave "Lower resolution to 720p" unticked for now. Tick it only if the first result misses the target or the file is 1080p or larger and the cap is tight.
  4. Press Compress Video and wait. The status line estimates the time left, and the tool may run a second pass labelled "Fine-tuning to reach the target size".
  5. Read the result line. It prints the new size in MB, the percentage saved and whether the target was reached.
  6. Compare the Original and Compressed previews side by side, scrubbing to the fastest-moving moment, such as a scroll or a page transition.
  7. Download. The output is always an MP4 named compressed_ plus your original name.
Tip

if the result says the target was not reached, tick 720p and run again before reaching for a lower number.

Reading the result honestly

Three outcomes are possible. The first is the happy one: target reached, previews look right. The second is a miss, where the page says the target was not reached and this is as small as it got. That tends to happen with long clips, high resolution and busy footage. Tick 720p, choose Strong, or cut the clip shorter.

The third outcome surprises people. Some files are already encoded so efficiently that re-encoding makes them bigger. The page then offers "Keep original (download)" and a separate button for the larger MP4. Keeping the original costs no trial use, because a trial use is only counted when you download a compressed result.

Mistakes that waste a run

Compressing a clip that still contains dead air. Cut the first twenty seconds of "can you see my screen?" with Trim Video first and you shrink the file before encoding even starts. The same goes for a webcam corner you never needed.

Expecting a phone clip to open without trouble. Some phone recordings, particularly .mov files, use a codec the in-browser engine cannot read. If it fails immediately, re-export the clip from your phone's share options and try again.

Closing the tab mid-encode. Compression is the slowest operation among the video tools because every frame is re-encoded. There is no automatic timeout, so let it run, or press Stop if you change your mind.

Sending the compressed file without watching the end. Audio is re-encoded too, so check that the last sentence of narration survived.

Which neighbouring tool to use instead

If the portal rejects the format rather than the size, use Convert Video first; its sibling guide on converting WebM to MP4 covers when a conversion is only a quick re-wrap. If you only need the narration, Extract Audio produces a much smaller file than any video setting can. The recording itself is easier to keep small from the start if you follow the advice in recording async demos, and more video utilities sit under video tools.

A quick before-you-send check

Play the compressed file from the start on a phone, not just in the preview. Look at small text in the UI, because text edges are the first thing to soften. Confirm the size in your file manager, since some systems show 1,000-based megabytes and the portal may count 1,024-based ones. If it is within a megabyte of the cap, run it again with a target two megabytes lower and avoid the rejection email.

The video is processed in your browser, so the demo itself is not uploaded to FreeDailyPro. The engine file that does the work is downloaded to your browser the first time, which is why a very restrictive network can block the tool before it starts.

Which cap keeps rejecting your videos: a client portal, a chat app or an email attachment? Tell us on the contact page and we will write the preset guide for it.

Open Compress VideoOpen Video ConverterOpen Trim & CutOpen Extract Audio